DC – PU/PIR insulation panel with fire class EI 30

Application: Environments where high demands are placed on hygiene, including the food industry and the pharmaceutical industry, and where there is also a fire requirement of EI 30

Tried and tested: Over 45 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Assambly: Built-in locking system that ensures a tight vapor barrier, prevents water/dirt and bacteria in joints. Gives great disc effect in walls and ceilings which in turn minimizes costs for bearing steel.

Insulation: The PU/PIR foam insulates 60% better than mineral wool, does not absorb water.

Fire: Inquire about the many options.

Sustainability: Panels with PU/PIR foam could be reused even after many years as the insulation remains intact.

Gypsum boards on both sides
Panel thickness Weight kg/m2 U-value W/M2K
100 mm 30,3 0,28
125 mm 31,2 0,21
150 mm 32 0,17
175 mm 32,9 0,14
200 mm 33,8 0,12
225 mm 34,7 0,11
Production tolerances According to EN14509
Production measures Width: 1200 mm – Length: Up to 8800 mm
Fire approval EI30
Sound attenuation Contact DC-System for information
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation PU/PIR foam between 2 pcs. embedded plasterboard
Surfaces 0.55 mm galvanized steel sheet, coated with 25 my polyester varnish – on both sides. This panel can, if desired,
supplied with other surface materials, e.g. 200 my plastisol, PVC Food Safe, stainless steel etc. The surfaces are hygienic and easy to clean.
Assembling The panels are supplied with tongue and groove joints and eccentric locks, which are embedded in the foam
Color The panel is delivered as standard grey/white RAL 9002. If other colors are desired – contact DC-System
Other things Need more information – contact DC-System. DC-System can, if desired, assist with measurement

Fire class EI 30

DC – PU/PIR insulation panel with fire class EI 30 is primarily used inside buildings and is particularly useful in refrigeration/freezers, the food industry, storage and stable buildings, as walls/ceilings, and where high demands are made on insulation and surface coating, and where at the same time, a fire class of EI 30 is required. The panel has particularly good insulating properties and has a built-in vapor barrier.

DC-Panel Type EI30 (BD30) can, for example, be used as a partition in a fire cell section, as the panel meets the EI30 (BD30) requirement for a non-bearing, separating building part. The panel is particularly useful where there are special requirements for fire-retardant properties.

Read about one of our other panels

DC-Mineral wool panel, Acoustics
Application: Office and industrial buildings where there are high sound requirements. Samling: Pa...
DC- PU/PIR insulation panel with built-in burglary protection
Application: Areas where goods with a high risk of burglary are stored and where there are also r...
DC-Thermopanel wall
Application: DC – The thermal panel is used as a load-bearing structure in homes up to 2 floors. ...
DC- PU/PIR insulation panel for floor with Masterboard
Application: Floors for freezer tunnels. Assambly: Built-in locking system that ensures a tight v...