DC- PU/PIR insulation panel with built-in burglary protection

Application: Areas where goods with a high risk of burglary are stored and where there are also requirements for hygiene and ease of cleaning, including the storage of alcohol and tobacco.

Tried and tested: Over 30 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Assambly: Built-in locking system that ensures a tight vapor barrier, prevents water/dirt and bacteria in joints. Gives great disc effect in walls and ceilings which in turn minimizes costs for bearing steel.

Insulation: The PU/PIR foam insulates 60% better than mineral wool, does not absorb water.

Fire: inquire about the many possibilities

Sustainability: Panels with PU/PIR foam could be reused even after many years as the insulation remains intact.

Panel thickness Weight kg/m2 U-value W/M2K
80 mm 15,5 0,27
100 mm 16,2 0,22
125 mm 17,1 0,17
150 mm 18 0,15
175 mm 18,8 0,13
200 mm 19,7 0,11
225 mm 20,6 0,1
Production tolerances According to EN14509
Production measures Width: 1200 mm – Length: Up to 8800 mm
Fire approval Contact DC-System for information
Sound attenuation Contact DC-System for information
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation PU/PIR foam
Surfaces Trapezoidal, galvanized steel sheets coated with 25 my polyester varnish or 200 my plastisol. On the outside of the panel, 6 mm reinforcing mesh is embedded between the steel plate and foam. The panel can be supplied in other surface materials such as stainless steel.
Assembling The panel has a fer and not joint and cast-in eccentric locks
Color The panel is delivered as standard grey/white RAL 9002. If other colors are desired – contact DC-System
Other things Need more information – contact DC-System. DC-System can, if desired, assist with measurement

Panels for rooms with a high risk of burglary

DC – insulation panel with built-in burglary protection is particularly suitable for use in facades and rooms where goods with a high risk of burglary are stored. There is a built-in reinforcement in the panel, which means that the panel is approved with a RUS class 2. The panel also has great strength and good hygienic and easy-to-clean surfaces.

Read about one of our other panels

DC – PU-PIR insulation panel for floor, slanted
Application: Floors for freezer tunnels. Assambly: Built-in locking system that ensures a tight v...
DC – PU/PIR insulation panel with fire class EI 60
Application: Environments where high demands are placed on hygiene, including the food industry a...
DC- PU/PIR insulation panel with built-in burglary protection
Application: Areas where goods with a high risk of burglary are stored and where there are also r...
DC-Thermopanel wall
Application: DC – The thermal panel is used as a load-bearing structure in homes up to 2 floors. ...