DC- PU/PIR insulation panel for floor with Masterboard

Application: Floors for freezer tunnels.

Assambly: Built-in locking system that ensures a tight vapor barrier, prevents water/dirt and bacteria in joints.

Tried and tested: Over 35 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Insulation: The PU/PIR foam insulates 60% better than mineral wool, does not absorb water.

Sustainability: Panels with PU/PIR foam could be reused even after many years, as the insulation remains intact.

Panel thickness Weight kg/m2 U-value W/M2K U-value EN 13165 W/M2K
80 mm 22,4 0,37 0,4
100 mm 23,2 0,28 0,3
125 mm 24,2 0,21 0,23
150 mm 25,2 0,17 0,18
175 mm 26,2 0,14 0,15
200 mm 27,2 0,12 0,13
225 mm 28,2 0,11 0,12
Production tolerances According to EN 14509
Production measures Bredde: 1200 mm – Længde: 8800 mm
Fire approval Contact DC-System for information
Sound attenuation Contact DC-System for information
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation PU/PIR foam
Surfaces The panel can be supplied with several different surfaces such as Masterboard, plywood, cement-based chipboard, etc. The back is galvanized steel sheet with polyester lacquer
Assembling The panel is supplied with fer and not and cast-in eccentric locks
Color Undyed
Other things Need more information – contact DC-System. DC-System can, if desired, be helpful with measurement

A well-tested floor panel that can handle extra heavy loads

This panel is an extra strong floor panel with added reinforcements in the form of floor blocks, which are placed by agreement as support for legs on furniture or machines. The panel can bear extra heavy loads — also in the form of heavy machinery — and is primarily used for freezing tunnels, storage, cooling and freezer rooms.

Sealant is applied to the edge of the panels, after which they are pushed together and locked by turning the locking key in the locking hole. The excess sealant is scraped away with the bottom of the silicone tube and the hole is closed with it
supplied closing plug.

The DC – PU/PIR insulation panel for floor with masterboard is primarily used as a floor in freezer tunnels. The panel can be delivered with cast-in reinforcements placed as desired, so that heavy machines can stand directly on the floor.

Read about one of our other panels

DC-Renovation panel
Application: Environments where high demands are placed on hygiene, including the food industry a...
DC fiberglass – insulation panel with locking system
Application: Environments where extreme demands are placed on hygiene, where aggressive chemicals...
DC-Mineral wool panel, Acoustics
Application: Office and industrial buildings where there are high sound requirements. Samling: Pa...
DC post-insulation panel with PU/PIR/mineral wool
Application: After insulation of existing homes, which must subsequently be finished with a plast...