DC-Mineral wool panel, Facade

Application: Office and industrial buildings where there are high fire requirements.

Assembly: The panel is assembled with fer and not and can be supplied with hidden joints (screws). Assembly: The panel is assembled with tongue and groove and can be supplied with hidden joints (screws).

Tried and tested: Over 20 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Fire: Inquire about the many options.

Panel type Core thickness U-value W/M2K acc. EN 12667 U-value W/M2K ac. EN 14509 Weight kg/m2 Fire resistance
FP-F 60 60 0,62 0,67 17,8
FP-F 80 80 0,48 0,51 20,2 EI 90
FP-F 100 100 0,39 0,42 22,6 EI 90
FP-F 120 120 0,33 0,35 25 EI 120
FP-F 140 140 0,28 0,3 27,4 EI 120
FP-F 150 150 0,26 0,28 28,6 EI 120
FP-F 160 160 0,25 0,27 29,8 EI 120
FP-F 180 180 0,22 0,24 32,1 EI 120
FP-F 200 200 0,2 0,22 34,6 EI 120
FP-F 240 240 0,17 0,18 39,3 EI 120
Production tolerances According to EN 14509
Production measures Width: 1100 mm – Length: Max 15.6 m (extra long transport is necessary over 13.6 m length) NOTE! Be aware that deflection of long panels may occur under high load
Fire approval According to EN13501-1 Euroclass A2-s1, d0, non-flammable
Sound attenuation Approx. 32 dB (depending on frequency and thickness)
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation Insulation core of mineral wool. Shear strength is achieved at the same time with steel plate on the outside. Density approx. 120 kg/m3 (140 kg/m3 on request). Capillary layer
Surfaces 0.6 mm galvanized steel plate, coated with 25 my polyester varnish on both sides. ATTENTION! The protective film on the panel must be removed no later than 10 weeks after the production date
Assembling Panels are installed with a hidden joint and drip nose for horizontal installation
Color The panel is delivered as standard grey/white RAL 9002. If other colors are desired – contact DC-System
Other things Need other information – contact DC-System. DC-System can, if desired, be helpful with measurement

A well-tested mineral wool panel, where fire safety is given extra importance

DC – The mineral wool panel is a good solution when it comes to fire safety. The panel can be mounted on any construction such as wood, steel and concrete. The panels are assembled to avoid thermal bridges. On the edge of the panels, mineral wool is protected with a plastic foil so that the insulation does not absorb construction moisture. The panel is not suitable for freezer rooms.

The facade panel is mounted with hidden joints, which allows for a wide range of exciting and architectural solutions. The panel can be mounted both horizontally and vertically.

PE foil on the panel joints effectively protects against building moisture. The panel can be supplied with a wide range of profile types and colours. Engelsk Ved specielle ønsker — kontakt DC-System. For special requests — contact DC-System.

Read about one of our other panels

DC – PU/PIR insulation panel for floor with phenol coating
Application: Floors for smaller cold/freezer rooms. Assambly: Built-in locking system that ensure...
DC- PU/PIR insulation panel with fire class MK
Application: Environments where high demands are placed on hygiene, including the food industry a...
DC- PU/PIR insulation panel with cement-based chipboard DC- PU/PIR insulation panel with cement-based chipboard
Application: Environments with very aggressive environments and mechanical influences. Assambly: ...
DC-Mineral wool panel, Facade
Application: Office and industrial buildings where there are high fire requirements. Assembly: Th...