DC-Mineral wool panel, Wall/Ceiling

Application: Office and industrial buildings where there are high fire requirements.

Assembly: The panel is assembled with fer and not and can be supplied with hidden joints (screws). Assembly: The panel is assembled with tongue and groove and can be supplied with hidden joints (screws).

Thoroughly tested: Over 20 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Fire: Inquire about the many options.

Mineral wool panel specifications

Panel type Core thickness U-value W/M2K acc. EN 12667 U-value kg/m2 W/M2K Weight kg/m2 Fire resistance
WP-F 60 60 0,64 0,7 17,4 EI 30
WP-F 80 80 0,48 0,52 19,8 EI 60
WP-F 100 100 0,39 0,41 22,2 EI 90
WP-F 120 120 0,33 0,35 24,6 EI 120
WP-F 140 140 0,28 0,3 27 EI 120
WP-F 150 150 0,26 0,29 28,2 EI 180
WP-F 160 160 0,25 0,27 29,4 EI 180
WP-F 180 180 0,22 0,24 34,2 EI 180
WP-F 200 200 0,2 0,22 31,7 EI 240
WP-F 240 240 0,17 0,18 39 EI 240
Production tolerances According to EN 14509
Production measures Width: 1100 mm – Length: Max 15.6 m (extra long transport is required over 13.6 m length). ATTENTION! Be aware that deflections on long panels may occur under high loads
Fire approval According to EN 13501-1, Euroclass A2-s1, d0, non-flammable
Sound attenuation 32 dB (depending on frequency and thickness)
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation Insulation core of mineral wool. Shear strength is achieved at the same time with steel plate on the outside. Density approx. 120 kg/m3 (140 kg/m3 on request). Capillary layer
Surfaces 0.6 mm galvanized steel sheet coated with 25 my polyester varnish – on both sides. ATTENTION! The protective film on the panel must be removed no later than 10 weeks after the production date
Assembling Fer og not assembly
Color The panel is delivered as standard grey/white RAL 9002. If other colors are desired – contact DC-System for information
Other things Need more information – contact DC-System. DC-System can, if desired, be helpful with measurement

A well-tested mineral wool panel, where fire safety is given extra importance

DC – The mineral wool panel is a good solution when it comes to fire safety. The panel can be mounted on any construction such as wood, steel and concrete. On the edge of panels, mineral wool is protected with a plastic foil so that the insulation does not absorb building moisture. The panel is not suitable for freezer rooms.

The mineral wool panel is a good solution when it comes to fire safety. The panel has a construction width of 1100 mm and can be used for both ceilings and walls. The joints of the panels can be fitted so that no thermal bridges occur, which results in a homogeneous and dense surface. The system can also be used for complex building forms.

PE foil on the panel joints effectively protects against building moisture. The panels are delivered with a tongue and groove joint and must be jointed on both the outside and inside when setting up.

The panel can be supplied with a wide range of profile types and colours. For special requests — contact DC-System.

Read about one of our other panels

DC fiberglass – insulation panel with locking system
Application: Environments where extreme demands are placed on hygiene, where aggressive chemicals...
DC – PU/PIR insulation panel with fire class EI 30
Application: Environments where high demands are placed on hygiene, including the food industry a...
DC – PU/PIR Hygienic insulation panel with locking system
Application: Environments where there is a lot of cleaning and where there are generally high dem...
DC-Thermopanel wall
Application: DC – The thermal panel is used as a load-bearing structure in homes up to 2 floors. ...