DC- PU/PIR insulation panel with cement-based chipboard DC- PU/PIR insulation panel with cement-based chipboard

Application: Environments with very aggressive environments and mechanical influences.

Assambly: Built-in locking system that ensures a tight vapor barrier, prevents water/dirt and bacteria in joints. Gives great disc effect in walls and ceilings, which in turn minimizes costs for load-bearing steel.

Tried and tested: Over 30 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Insulation: The PU/PIR foam insulates 60% better than mineral wool, does not absorb water.

Fire: Inquire about the many options.

Sustainability: Panels with PU/PIR foam could be reused even after many years, as the insulation remains intact.

Cement chipboard on one side 8-20 mm Cement chipboard on two sides 8-20 mm
Panel thickness Weight kg/m2 U-value W/M2K Weight kg/m2 U-value W/M2K
80 mm 17,4-31,9 0,32-0,39 *22,6 *0,35
100 mm 18,2-32,7 0,25-0,29 23,4-53,2 0,27-0,37
125 mm 19,3-33,8 0,20-0,22 24,5-54,3 0,21-0,26
150 mm 20,3-34,8 0,16-0,18 25,5-55,3 0,17-0,20
175 mm 21,3-35,8 0,14-0,15 26,5-56,3 0,14-0,17
200 mm 22,3-36,8 0,12-0,13 27,5-57,3 0,12-0,14
225 mm 23,4-37,9 0,11-0,11 28,6-58,4 0,11-0,12
250 mm 24,4-38,9 0,10-0,10 29,6-59,4 0,10-0,11
Production tolerances According to EN14509
Production measures Width: 1200 mm – Length: Up to 8800 mm
Fire approval From 8 mm and above, the cement-based chipboard meets the requirement for B-S1, d0 and class 1 cladding
Sound attenuation Contact DC-System for information
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation PU/PIR foam
Surfaces 8, 10, 12, 16 and 20 mm cement-based chipboard. If desired, the cement-bonded chipboard can be covered with a galvanized chipboard coated with 25 my polyester varnish – or other surface
Assembling The panels are supplied with tongue and groove joints and eccentric locks, which are embedded in the foam
Color The panel is supplied with uncoloured cement-based chipboard
Other things Need more information – contact DC-System. DC-System can, if desired, assist with measurement

DC – PU/PIR insulation panel with cement-based chipboard is primarily used in buildings for agriculture, where there are extremely aggressive environments and large mechanical impact of animal husbandry.

The panel is very suitable where demands are made for a surface that can withstand the effects of aggressive environments, such as e.g. in stable buildings, just as the cement-bonded chipboard withstands mechanical influences extremely well.

Sealant is applied to the edge of the panels, after which they are pushed together and locked by turning the locking key in the locking hole. The excess sealant is scraped away with the bottom of the silicone tube, and the hole is closed with the enclosed plug.

NB: There may be curvature on the long panels

Read about one of our other panels

DC-Thermopanel wall
Application: DC – The thermal panel is used as a load-bearing structure in homes up to 2 floors. ...
DC-Mineral wool panel, Wall/Ceiling
Application: Office and industrial buildings where there are high fire requirements. Assembly: Th...
DC- PU/PIR insulation panel with fire class MK
Application: Environments where high demands are placed on hygiene, including the food industry a...
DC – PU/PIR insulation panel for roof
Application: Finished roof on industrial and agricultural buildings. Assembly: The roof panel is ...