DC – PU/PIR insulation panel for floor with phenol coating

Application: Floors for smaller cold/freezer rooms.

Assambly: Built-in locking system that ensures a tight vapor barrier, prevents water/dirt and bacteria in joints.

Tried and tested: Over 45 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Insulation: The PU/PIR foam insulates 60% better than mineral wool, does not absorb water.

Sustainability: Panels with PU/PIR foam could be reused even after many years, as the insulation remains intact.

Panel thickness Weight kg/m2 U-value W/M2K U-value EN 13165 W/M2K
80 mm 16,2 0,32 0,35
100 mm 17 0,25 0,27
125 mm 18 0,19 0,21
150 mm 19 0,16 0,17
175 mm 20 0,13 0,15
200 mm 21 0,12 0,13
225 mm 22 0,1 0,11
Production tolerances According to EN14509
Production measures Width: 1200 mm – Length: Up to 8800 mm
Fire approval Contact DC-System for information
Sound attenuation Contact DC-System for information
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation PU/PIR foam
Surfaces Top: 12 mm water-resistant Easten veneer with non-slip phenolic coating. Underside: 0,55 mm galvaniseret stålplade belagt med 25 my polyesterlak
Assembling The panels are supplied with cast-in eccentric locks
Color Brown phenolic coating. Steel plate grey/white RAL 9002
Other things Need more information – contact DC-System. DC-System can, if desired, be helpful with measurement

A well-tested insulation panel which is particularly useful in smaller cold and freezer rooms

This floor panel is covered on the surface with a 12 mm waterproof east veneer with non-slip phenolic coating and a galvanized steel sheet on the back. The panel has a high strength, good stability and an excellent insulating ability.

The DC – PU/PIR insulation panel for floors with phenolic coating is primarily used as a floor in smaller cold/freezer rooms where there is no truck traffic. The panel can also be used in existing buildings
demolition of existing concrete is not necessary.

Read about one of our other panels

DC-Thermopanel wall
Application: DC – The thermal panel is used as a load-bearing structure in homes up to 2 floors. ...
DC post-insulation panel with PU/PIR/mineral wool
Application: After insulation of existing homes, which must subsequently be finished with a plast...
DC-Renovation panel
Application: Environments where high demands are placed on hygiene, including the food industry a...
DC-Mineral wool panel, Acoustics
Application: Office and industrial buildings where there are high sound requirements. Samling: Pa...