DC-Thermopanel Roof

Application: DC – The thermal panel is used as a roof structure in homes. The panel can handle a free span of up to 6.5 m.

Assembly: Built-in locking system that ensures a tight assembly that also contributes to stability.

Tried and tested: Over 10 years, the panel has been thoroughly tested in many different contexts and degrees of difficulty.

Vapor barrier: Vapor barrier is built into the panel.

Mould, fungus: The panel cannot contribute to mold and fungus formation.

Insulation: The PU/PIR foam insulates 60% better than mineral wool, does not absorb water.

Fire: BS1Do, MK.

Construction time: The roof of an ordinary detached house is erected in 1 day.

Sustainability: Panels with PU/PIR foam could be reused even after many years, as the insulation remains intact.

Download as PDF3 MB
Panel type Core thickness U-value W/M2K Weight kg/m2 Fire resistance
150 mm 136 0,16 31,2 Class 1
175 mm 161 0,13 32,2 Class 1
200 mm 186 0,11 33,2 Class 1
225 mm 209 0,1 34,2 Class 1
250 mm 236 0,09 35,2 Class 1
Production tolerances According to EN14509
Production measures Width: 1200 mm – Length: Up to 8500 mm
Fire approval The cement-bonded chipboard meets the requirement for B-S1, d0 and class 1 cladding on ind. side of panel
Sound attenuation Contact DC-System for information
Tension table Contact DC-System or see it at www.dc-system.dk
Insulation PU/PIR foam
Surfaces The panels are supplied with 0.55 mm galvanized steel sheet on the outside and 12 mm cement chipboard between foam and 0.55 mm galvanized steel sheet on the inside
Assembling The panels are supplied with cast-in eccentric locks
Color Steel sheets are delivered as standard grey/white RAL 9002
Other things Need other information – contact DC-System. DC-System can, if desired, be helpful with measurement

A well-tested insulation panel for roofs with a free span of up to 6.5 metres

DC – The Thermo panel with locks is used as a roof construction in homes. The panel has a super insulation that provides a very slim roof construction. There are no organic materials in the panel, which eliminates the risk of mold and fungus in the panel. The panel contributes strongly to the green transition, as the CO2 contribution is large small / m2. The panel allows for a closed building in a very short time, so that building moisture is minimized in others materials. The panel is particularly suitable for those roofs which must subsequently be finished with roofing felt.

The panel is particularly useful for roof construction for housing.

The elements do not absorb moisture. When properly installed, they are considered airtight.

Sealant is applied to the edge of the panels, after which they are pushed together and locked by turning the locking key in the locking hole. The excess sealant is scraped away with the bottom of the silicone tube and the hole is closed with sealant.

Read about one of our other panels

DC-Renovation panel
Application: Environments where high demands are placed on hygiene, including the food industry a...
See panel
DC- PU/PIR insulation panel with fire class MK
Application: Environments where high demands are placed on hygiene, including the food industry a...
See panel
DC- PU/PIR insulation panel for floor with Masterboard
Application: Floors for freezer tunnels. Assambly: Built-in locking system that ensures a tight v...
See panel
DC – PU/PIR insulation panel with fire class EI 60
Application: Environments where high demands are placed on hygiene, including the food industry a...
See panel

Want to know more?
Contact us today

If you have questions about our products, services or would like a visit, please feel free to contact us. 

Fill out the form or give us a call +45 98 62 42 00 

Contact us immediately!

DC-System Insulation A/S

Nordvestvej 8, 9600 Aars